Bushmaster Serial Number Manufacture Date

• Bushmaster Bfi Serial Number Date
• Bushmaster Serial Number Manufacture Date Washer
• Bushmaster Manufacture Date

FIREARMS INFORMATION

The year/serial numbers under Colt SP series was forwarded to me by an individual whose return address I no longer have. Double asterisk (.) under Bushmaster, a person on the internet e-mailed me that he had a lower that was shipped stripped (thus not a complete rifle) in 1991 from Bushmaster with serial #0327XX - ALWAYS CALL TO VERIFY. Mar 27, 2016 Hi everyone, I traded a handgun for a Bushmaster Carbon 15, with some extras. It does not have the forward assist or the dust cover. Serial # is BR3017490 - Can anyone tell me the approximate date is was made? - And also your opinion of this rifle. Dec 15, 2009 Trying to figure out what AR15 I have, its a Bushmaster MOD. XM15-E2S and its stamped CAL. MULTI It shoots 223/5.56 Ive read that all Bushmasters serial numbers start with either a BFI or IL prior to the numbers,But mine starts with ARA. Jun 27, 2020. The year/serial numbers under Colt SP series was forwarded to me by an individual whose return address I no longer have. Double asterisk (.) under Bushmaster, a person on the internet e-mailed me that he had a lower that was shipped stripped (thus not a complete rifle) in 1991 from Bushmaster with serial #0327XX - ALWAYS CALL TO VERIFY.

Remington never (*) used serial numbers to identify the date of manufacture of it's firearms, they however stamped a date code (spelled out below) by the first letter meaning the month and the last letter the year of manufacture.

BARREL DATE CODE - stamped exposed on LH top rear of barrel after 1920

the following will only be stamped where applicable Kakao emoji.

#2 Part order barrel (not originally assembled to firearm)

#3 Service section received

#4 Return as received

#5 Employee sale

R.E.P. On the RH side of the barrel will be a Magnaflux, Remington proof & a test mark

If a gun is returned to the factory as a fire damaged, or blown up firearm, the factory will stamp it as a prefix to their date code with a #4 on the barrel and return it un-repaired. Then if the gun is ever subsequently returned to a warranty center or the factory by ANYONE, they will refuse to work on it as an unsafe firearm.

Tv tuner software for mac. REMINGTON MANUFACTURING DATE CODE

stamped on LH top rear of barrel, 2 or 3 digit, (month first, year after) these will normally only be the last letters as seen below,

with the whole list shown here ONLY if it had been returned for repairs
The anchor shown here with the date code is just a symbol, as many different inspector marks will be seen

The above information was taken from Remington's own information sheet, so if your gun may not conform, then I am also at a loss in explaining.

The factory says all barrels are date code stamped, well I have found some that are not, or if they are, are so erratic stamping that trying to decipher them is impossible.

The photos below may help a bit. Both were taken off Remington 760s, with the one on the left, a 30-06 that I bought new October 10, 1954. This has been rebored to a 35 Whelen Improved. The one on the right again a 30-06, but with a shorter barrel that I made into a knock around quad rifle with pivot mounts.

(*) On 8/9/99, they stopped stamping the barrels with the date code. They however continued to mark the date code on the end flap of the shipping box for shotgun barrels however. They planned on using just the serial numbers to tell when the gun was manufactured. So there was a 2 year gap in rifle date coded barrels and the normal consumer, or gunsmith would have to contact the factory for this information. They then saw the error of their ways apparently because of being inundated by phone calls and resumed stamping the date code on the barrel on 10/1/01.

You will notice the year code repeats itself, but over 20 years difference, so even if it was used on the same model, in all likelihood sights or stocks would be different which would indicate the different date. You will also notice the month code spelling out BLACKPOWDERX, this is a common code in the firearms industry. Also some letters were left out if there was a chance of misidentifying a date. Also they jockeyed year letters to a new starting point in 1980.

If you find marks on the underside of the barrel, they will more than likely be fitters or assembly marks, which mean nothing as to dating the firearm.

I have seen one EARLY 740 S/N 54,9XX that has a barrel date coded May of 1969, which apparently had been sent back to the factory and rebarreled with a original 740 barrel instead of a 742 which was in production at that time.

To find general manufacturing dates it may be best to go to the Blue Book of Gun Values, which does give manufacturing dates of most models.

An issue that people need to be aware of, is that many Remington firearms such as the 870 series of shotguns can have their barrels easily changed or replaced. So, if the barrel is not original to the specific firearm in question the date code may be meaningless. Also if there is a custom or aftermarket barrel installed it will not have these factory codes.
Confounding the issue a bit may be the fact that Remington Arms stamps their final inspector stamps and assembly (product) codes in the immediate area of the date codes. So it may be difficult at times to determine exactly what is what. With that in mind, and considering a lot of variables. If a specific Remington firearm has a serial number, Remington Customer Service is always the first source which should be checked for date of manufacture as they would be the definitive source. There are no publically accessible databases for Remington serial numbers.

With the hundreds of different Remington models produced over the past 200 years, it can sometimes be difficult to determine the age of your firearm.

Overview
Since serial numbers were not required until 1968, your firearm may not have a serial number. For models without a serial number, we may be able to determine the age by the 2-3 letters that are stamped on the barrel. If your firearm does have a serial number, if you will call or email us the serial number and model number we can determine the approximate age of your firearm.
Contact Remington through their Help Center by e-mail at info@remington.com or call their historian at 1-800-243-9700 Mon-Fri 9-5 EST.

Back to Ramblings

Originated 01-29-2007, Last updated 04-28-2020
Contact the author

Bushmaster Bfi Serial Number Date

PREBAN AR15 INFORMATION RESOURCES | PRE BAN AR 15

PRE BAN AR 15

PRE BAN AR 15 information is very valuable to shooters in states that maintain an ASSAULT WEAPON BAN. While I dont normally advocate borrowing content from other websites I feel this information is invaluable and needs to be protected, duplicated and shared for the greater good of the shooting community.

If anyone has more information and links please post them at the bottom and I will update the list. If you have a lower of from one of the lesser known brands and have managed to verify the date to the serial number please add your info to the comments and I will add it to the master list.

OLYMPIC ARMS

Q: What does my serial number mean?

A: Nothing is more frustrating than to know little or nothing about the firearm you own or are about to buy. Use the information in this page to help determine when your Olympic Arms AR 15 was produced. Please read all of the details on this page because there are many questions answered in the following paragraphs.

As many of you already know, on the 7th of June, 2000, Olympic Arms experienced a devastating fire that destroyed our sales offices. In those offices were housed our current as well as archival records with regards to manufacture, acquisition and distribution of firearms. The books that we, as well as all federally licensed firearms dealers are required to keep are commonly known as 'Bound Books', or 'A&D' (acquisition & distribution) books.

These books, over 25 years of Olympic Arms history and data, were completely destroyed in that fire. All A& D book records prior to the 7th of June, 2000 are GONE. Period. This is an unfortunate situation that severely limits our ability to provide product information for any and all AR-15 lower receivers and/or complete guns manufactured prior to that date. As a result all that we can provide is what you see below, a date 'range' in which your serial number was manufactured.

We CANNOT provide you with the date the serial number was shipped, we CANNOT provide you with information determining whether a particular serial number was a factory assembled firearm, and most importantly, we CANNOT determine whether or not your particular serial number is a legal grandfathered pre-ban firearm.

Many people and organizations have been critical of Olympic Arms for not securing a copy of these records elsewhere, or keeping an electronic file of this data as an emergency back up. If you'd like to read why this decision was made, please read the article in the About Us section titled 'Pre-fire Bound Books'. Remember that Olympic Arms fully complied, and still does, with ATF regulations regarding A&D books.

Below you will see a list of serial numbers. At Olympic, we group our serial numbered lowers into 'ranges'. If you'll notice, all the serial number ranges have a letter prefix but one. The initial receivers made by Olympic Arms simply contain a 4 digit serial number, no letter prefix. Each subsequent serial number range (either beginning with 0001, or 1001) will show a 1 or 2 letter prefix.

Additionally, you will see several lines for serial numbers that begin with the same letter(s) prefix. These prefix series are divided by a date range to their right. These date ranges are the beginning and ending dates of the physical paper ledgers in which those numbers were recorded. In other words, the ledger books were not large enough to contain all of the numbers (0001-9999), in one book. For that reason, there is a beginning date and end date for each ledger. That is what you see below.

Match your receiver up with the letter prefixes on the chart below. Each line is separated into 5 columns.

Column 1: The serial number itself (including prefix).

Column 2: The beginning serial number in that book.

Column 3: The beginning date for that book. If there is only one date listed after the serial numbers in column 2 and/or 2, all of those numbers were manufactured on that same day.

Column 4: End date for that book.

Column 5: Comments regarding that range of serial numbers. The comments as listed would apply to all of the serial numbers with the prefix listed to the left.

AR15.com

The folks over at AR15. com have compiled the list below

Disclaimer: This list is correct to the best of my knowledge, however, I accept absolutely no responsibility for the accuracy of this information or for the consequences and/or damages occurring from any inaccuracies. I have compiled this list for the purposes of sharing information only. This is not intended to be used in any way except for personal entertainment. It is a compilation of both personal information and information submitted from others from the Internet. ALL SERIAL NUMBERS SHOULD BE VERIFIED FROM THE MANUFACTURER PRIOR TO ANY PURCHASE OR ASSEMBLY. It should be noted that it is a felony to possess a Post-Ban (newly assembled after Sept 13, 1994) assault weapon.

with the whole list shown here ONLY if it had been returned for repairs
The anchor shown here with the date code is just a symbol, as many different inspector marks will be seen

The above information was taken from Remington's own information sheet, so if your gun may not conform, then I am also at a loss in explaining.

The factory says all barrels are date code stamped, well I have found some that are not, or if they are, are so erratic stamping that trying to decipher them is impossible.

The photos below may help a bit. Both were taken off Remington 760s, with the one on the left, a 30-06 that I bought new October 10, 1954. This has been rebored to a 35 Whelen Improved. The one on the right again a 30-06, but with a shorter barrel that I made into a knock around quad rifle with pivot mounts.

(*) On 8/9/99, they stopped stamping the barrels with the date code. They however continued to mark the date code on the end flap of the shipping box for shotgun barrels however. They planned on using just the serial numbers to tell when the gun was manufactured. So there was a 2 year gap in rifle date coded barrels and the normal consumer, or gunsmith would have to contact the factory for this information. They then saw the error of their ways apparently because of being inundated by phone calls and resumed stamping the date code on the barrel on 10/1/01.

You will notice the year code repeats itself, but over 20 years difference, so even if it was used on the same model, in all likelihood sights or stocks would be different which would indicate the different date. You will also notice the month code spelling out BLACKPOWDERX, this is a common code in the firearms industry. Also some letters were left out if there was a chance of misidentifying a date. Also they jockeyed year letters to a new starting point in 1980.

If you find marks on the underside of the barrel, they will more than likely be fitters or assembly marks, which mean nothing as to dating the firearm.

I have seen one EARLY 740 S/N 54,9XX that has a barrel date coded May of 1969, which apparently had been sent back to the factory and rebarreled with a original 740 barrel instead of a 742 which was in production at that time.

To find general manufacturing dates it may be best to go to the Blue Book of Gun Values, which does give manufacturing dates of most models.

An issue that people need to be aware of, is that many Remington firearms such as the 870 series of shotguns can have their barrels easily changed or replaced. So, if the barrel is not original to the specific firearm in question the date code may be meaningless. Also if there is a custom or aftermarket barrel installed it will not have these factory codes.
Confounding the issue a bit may be the fact that Remington Arms stamps their final inspector stamps and assembly (product) codes in the immediate area of the date codes. So it may be difficult at times to determine exactly what is what. With that in mind, and considering a lot of variables. If a specific Remington firearm has a serial number, Remington Customer Service is always the first source which should be checked for date of manufacture as they would be the definitive source. There are no publically accessible databases for Remington serial numbers.

With the hundreds of different Remington models produced over the past 200 years, it can sometimes be difficult to determine the age of your firearm.

Overview
Since serial numbers were not required until 1968, your firearm may not have a serial number. For models without a serial number, we may be able to determine the age by the 2-3 letters that are stamped on the barrel. If your firearm does have a serial number, if you will call or email us the serial number and model number we can determine the approximate age of your firearm.
Contact Remington through their Help Center by e-mail at info@remington.com or call their historian at 1-800-243-9700 Mon-Fri 9-5 EST.

Back to Ramblings

Originated 01-29-2007, Last updated 04-28-2020
Contact the author

Bushmaster Bfi Serial Number Date

PREBAN AR15 INFORMATION RESOURCES | PRE BAN AR 15

PRE BAN AR 15

PRE BAN AR 15 information is very valuable to shooters in states that maintain an ASSAULT WEAPON BAN. While I dont normally advocate borrowing content from other websites I feel this information is invaluable and needs to be protected, duplicated and shared for the greater good of the shooting community.

If anyone has more information and links please post them at the bottom and I will update the list. If you have a lower of from one of the lesser known brands and have managed to verify the date to the serial number please add your info to the comments and I will add it to the master list.

OLYMPIC ARMS

Q: What does my serial number mean?

A: Nothing is more frustrating than to know little or nothing about the firearm you own or are about to buy. Use the information in this page to help determine when your Olympic Arms AR 15 was produced. Please read all of the details on this page because there are many questions answered in the following paragraphs.

As many of you already know, on the 7th of June, 2000, Olympic Arms experienced a devastating fire that destroyed our sales offices. In those offices were housed our current as well as archival records with regards to manufacture, acquisition and distribution of firearms. The books that we, as well as all federally licensed firearms dealers are required to keep are commonly known as 'Bound Books', or 'A&D' (acquisition & distribution) books.

These books, over 25 years of Olympic Arms history and data, were completely destroyed in that fire. All A& D book records prior to the 7th of June, 2000 are GONE. Period. This is an unfortunate situation that severely limits our ability to provide product information for any and all AR-15 lower receivers and/or complete guns manufactured prior to that date. As a result all that we can provide is what you see below, a date 'range' in which your serial number was manufactured.

We CANNOT provide you with the date the serial number was shipped, we CANNOT provide you with information determining whether a particular serial number was a factory assembled firearm, and most importantly, we CANNOT determine whether or not your particular serial number is a legal grandfathered pre-ban firearm.

Many people and organizations have been critical of Olympic Arms for not securing a copy of these records elsewhere, or keeping an electronic file of this data as an emergency back up. If you'd like to read why this decision was made, please read the article in the About Us section titled 'Pre-fire Bound Books'. Remember that Olympic Arms fully complied, and still does, with ATF regulations regarding A&D books.

Below you will see a list of serial numbers. At Olympic, we group our serial numbered lowers into 'ranges'. If you'll notice, all the serial number ranges have a letter prefix but one. The initial receivers made by Olympic Arms simply contain a 4 digit serial number, no letter prefix. Each subsequent serial number range (either beginning with 0001, or 1001) will show a 1 or 2 letter prefix.

Additionally, you will see several lines for serial numbers that begin with the same letter(s) prefix. These prefix series are divided by a date range to their right. These date ranges are the beginning and ending dates of the physical paper ledgers in which those numbers were recorded. In other words, the ledger books were not large enough to contain all of the numbers (0001-9999), in one book. For that reason, there is a beginning date and end date for each ledger. That is what you see below.

Match your receiver up with the letter prefixes on the chart below. Each line is separated into 5 columns.

Column 1: The serial number itself (including prefix).

Column 2: The beginning serial number in that book.

Column 3: The beginning date for that book. If there is only one date listed after the serial numbers in column 2 and/or 2, all of those numbers were manufactured on that same day.

Column 4: End date for that book.

Column 5: Comments regarding that range of serial numbers. The comments as listed would apply to all of the serial numbers with the prefix listed to the left.

AR15.com

The folks over at AR15. com have compiled the list below

Disclaimer: This list is correct to the best of my knowledge, however, I accept absolutely no responsibility for the accuracy of this information or for the consequences and/or damages occurring from any inaccuracies. I have compiled this list for the purposes of sharing information only. This is not intended to be used in any way except for personal entertainment. It is a compilation of both personal information and information submitted from others from the Internet. ALL SERIAL NUMBERS SHOULD BE VERIFIED FROM THE MANUFACTURER PRIOR TO ANY PURCHASE OR ASSEMBLY. It should be noted that it is a felony to possess a Post-Ban (newly assembled after Sept 13, 1994) assault weapon.

If any information presented here is found to be incorrect or you have additional information to contribute, please contact me via E-Mail (hkusp40@midmaine.com) and I will update and re-issue the list.

Note: All items marked with a single asterisk (*) are taken from http://home1.gte.net/bblakley/ban/index.htm. Mp3 g player. The year/serial numbers under Colt SP series was forwarded to me by an individual whose return address I no longer have. Double asterisk (**) under Bushmaster, a person on the internet e-mailed me that he had a lower that was shipped stripped (thus not a complete rifle) in 1991 from Bushmaster with serial #0327XX – ALWAYS CALL TO VERIFY.

Advanced Armaments

No information – Apparently machined from bar stock aluminum, lowers are marked as M-15.

American Spirit Arms (Formerly 'Sun Valley Traders')

ALL lowers are Post Ban AR 15. Began introduction of lowers and rifles in mid/late 1998. Noted as having good fit & finish. Also, reported to be manufactured by Lewis Machine & Tool (LMT).

Armalite | Eagle Arms

Slightly over S/N 30,000 was the Pre Ban AR 15 cut-off, call to verify.* (Some Eagle lowers below the 30,000 range were determined to be POST BAN AR 15 by BATFE – call to verify) Armalite sells Eagle lowers, but sells factory complete rifles with Armalite lowers.

Bohica

Made stainless steel lowers, rumored to have also made AR-15 pistols. Lower marked M16-SA. This is NOT verifiable info as it came from the Internet. Out of Business.

Bushmaster

Below L051000 – Assembled Pre Ban AR 15 Rifles and some pre-94 lowers.**
L051001-L063000 – Mixed Pre Ban Assembled Rifles and Pre-Sept 94 Lowers (Call to verify)
L063001 and Up – Post Ban

Century International Arms

Lower marked CIA. All are Post-Ban. Made with Olympic Arms Receivers under contract.

Colt Firearms

CC001616 and Below – Pre-Ban
CH019500 and Below – Pre-Ban
GC018500 and Below – Pre-Ban
LH011326 and Below – Pre-Ban
MH086020 and Below – Pre-Ban
NL004800 and Below – Pre-Ban
SL027246 and Below – Pre-Ban
SP360200 and Below – Pre-Ban
1963 SP00001-SP00023**
1964 SP00101
1965 SP02501
1966 SP05600
1967 SP08250
1968 SP10750
1969 SP14000-SP14653
1970 SP15001-SP15473
1971 SP16001
1972 SP19401
1973 SP24201
1974 SP32601
1975 SP43801
1976 SP55301
1977 SP67651
1978 SP83400
ST038100 and Below – Pre-Ban
TA10100 and Below – Pre-Ban
BD000134 and Below – Pre-Ban (AR-15A3 Tactical Carbine – very rare model)
MT00001 and Above – Post-Ban
BK000001and Above – Post Ban (CAR-A3)
CST000001 and Above – Post-Ban (Began Late 1997 Production)
CMH000001 and Above – Post Ban
CCH010000 and Above – Post Ban MT6700, MT6700C and MT6700CH series, 1998 production

Dalphon

All are POST ban. Cast 356-T6 Aluminum, hardcoat anodized per mil-spec A-8625

Bushmaster Serial Number Manufacture Date Washer

DPMS

Below 10300 – Pre Ban AR 15 Rifles.
Some or all lowers are cast. Black in color. Some lowers are Stainless Steel.

Eagle Arms

Now called ArmaLite. They will not give out a list, but will look up on an individual basis. Lower receiver serial numbers DO NOT begin with EA.

Essential Arms

All are Pre Ban AR 15 Rifles as they went out of business in 1993. (DPMS bought them prior to the Ban) Call DPMS Lower receiver serial numbers begin with EA. Some or all lowers are cast. Light gray coloring. It is rumored that Ruger investment casted the lowers for Essential Arms.

Frankford Arsenal

All are Pre Ban AR 15 Rifles. As rumor has it, Olympic Arms produced the lowers for Frankford Arsenal Call Olympic Arms and then Frankford assembled the weapon. A2 configuration lower. Frankford Arsenal went out of business in 1987. (Info from RudolphoS@aol.com)

Hesse Arms

All AR-15's are post ban. Manufacturing began late 1997/early 1998.

J.L.M & Sons*

SC001 thru SC250 are Pre Ban AR 15 Rifles. All others are post ban.

Knights Armament Co. aka KAC

All AR-15's are post ban, very few AR-10's are pre-ban. No further info at this time.

Military Manufacturing (M2)

All were military/law enforcement only. Full auto lowers were standard, semi were optional. Lowers were machined form raw bar stock with improvements incorporated – 18deg magazine angle and square magazine release.

Bushmaster Manufacture Date

Nesard

See 'Sendra' below.

Olympic Arms (Continued)

4-numbers only – very very old. Probably machined from bar stock.
1-letter and 4# – older receiver, but forgings. (Some are newer, POST ban castings – call to verify.)
2-letters & 4# – most receivers follow this pattern.
2#, 2 letters, 4# – the first two #'s are year of manufacture of the lower.
2 letters, 6# (separated 2 & 4 – e.g. SA 96 0000) – first 2 #'s are year of manufacture.
'ICR' marked lowers are an European customer's overrun, has an unused additional hole – all ICR lowers are post ban.

Olympic Arms Manufacturer's Notes:

1. There were some odd variations and some custom serial numbers mixed in thru the years also. And, some receivers manufactured after the ban have the year stamp after the model name, not in the serial #. and if you don't see a year stamp on the receiver, it is not necessarily pre-ban.
2. Serial numbers that end in 'D' were duplicates and one was changed using this letter.
3. Recently some serial numbers have left with one or two letters followed by FIVE numbers. The last numbers are either 5's or 0's. 99.9% of these are post-ban.
4. 'Older' does not always mean pre-ban as per Corey Sattler.
5. 'BL' serial number series lowers are transitional with some pre and some post ban. If you have a 'BL' you'll have to call to verify for certain.

Professional Ordinance

All are post ban (including all of the pistols).

PWA

35222 and Below – Pre Ban AR 15 Rifles (Note:Some lowers are cast not forged. Out of business) Post-ban have a year prefix in the serial number. Rumored to have only sold lowers.

Rocky Mountain Arms

Producer of AR-15 type pistols.

Sendra

Post-ban receivers have a circle milled into the side of the magwell. They were originally bead-blasted to a non-glare finish. All others are pre-ban. (This is unverified info…) Also, they used to be NESARD. Rumored to have been owned by Dick Drasen (currently M&A Parts) and produced lowers only out of Barrington, Illinois. No complete guns were sold (again, unverified info).

Colt Carbine R6521

Colt Carbine R6521 – Is a rare Colt of which only a few hundred were made for export purposes. They are not marked Sporter, AR-15 or SP1. These are the only Colt AR15 type weapons allowed to be transferred among Connecticut citizens